1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the floor console assembly.
(Refer to Body - "Floor Console Assembly")
|
3. |
Disconnec the connectors (A) from the floor console assembly.
|
4. |
Remove the multimedia brackect (A) after loosening the mounting
screws (2EA).
|
5. |
Remove the multimedia jack (A) after pushing the multimedia jack
in the direction of the arrow.
|
Front Fog Lamps Installation
1.
Install the front fog bulb.
2.
Reconnect the lamp connector.
3.
Install the front bumper cover.
...
Drive Belt Tensioner Inspection
Check the belt tensioner for excessive foreign substances, crack, damage
or sticking of pivot shaft. Replace if necessary. ...
Knock Sensor (KS) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the knock sensor connector (A).
...