Kia Forte: Oil Pressure Switch Removal and Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Lubrication System / Oil Pressure Switch Removal and Installation
| 1. |
Disconnect the oil pressure switch connector (A) and then remove
the oil pressure switch (B).
|
| 2. |
Install in the reverse order of removal.
|
When installing the oil pressure switch, apply seal lock to the
thread.
|
Seal lock : THREEBOND 2403
Thickness : 0.2 ~ 0.4 mm
(0.008 ~ 0.016 in.)
|
Oil Pump Inspection
1.
Remove the relief plunger.
Remove the plug (A), spring (B) and relief plunger (C).
Tightening torque
Plug (A) :
...
Oil Pressure Switch Inspection
1.
Check the continuity between the terminal and the body with an
ohmmeter.
If there is no continuity, replace the oil pressure switch.
...
See also:
Components Location
1. Engine Control Module (ECM)
2. Manifold Absolute Pressure Sensor (MAPS)
3. Intake Air Temperature Sensor (IATS)
4. Engine Coolant Temperature Sensor (ECTS)
5. Throttle Positi ...
Control Cable Inspection
1.
Check the select cable for proper operation and for damage.
2.
Check the shift cable for proper operation and for damage.
...
Copyright © www.kifomanual.com 2014-2024