1. |
Remove the relief plunger.
Remove the plug (A), spring (B) and relief plunger (C).
|
2. |
Inspect the relief plunger.
Coat the plunger with engine oil and check that it falls smoothly
into the plunger hole by its own weight.
If necessary, replace timing chain cover.
|
3. |
Inspect the relief valve spring.
Inspect for distortion or breakdown of the relief valve spring.
|
4. |
Inspect the rotor side clearance.
Using a feeler gauge and precision straight edge, measure the
clearance between the inner rotors and precision straight edge.
If the side clearance is greater than maximum, replace the rotors
as a set.
If necessary, replace the timing chain cover.
|
5. |
Inspect the rotor body clearance.
Using a feeler gauge, measure the clearance between the outer
rotor and body.
If the body clearance is greater than maximum, replace the rotors
as a set.
If necessary, replace the timing chain cover.
|
6. |
Inspect the rotor guide clearance.
|
Heater Unit Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/ recycling/ charging station.
...
Instrument panel overview
1. Instrument cluster
2. Lighting control lever
3. Audio remote control buttons
4. Horn
5. Driver's front air bag
6. Cruise control button
7. Wiper and washer control lever
8. Ignition ...
Installation
Clutch cover and disc should be replaced as a set.
1.
Apply grease on a disc spline ...