Kia Forte: Oil Pump Removal and Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Lubrication System / Oil Pump Removal and Installation
| 1. |
Remove the timing chain cover.
(Refer to Timing System – “Timing Chain Cover”)
|
| 2. |
Remove the oil pump cover (A).
|
| 3. |
Remove the inner rotor (A) and outer rotor (B).
|
| 4. |
Install in the reverse order of removal.
|
Oil Pump Components
1. Inner roter
2. Outer roter
3. Oil pump cover
4. Relief plunger
5. Relief spring
6. Relief plug
7. O-ring (suction side)
8. O-ring (discharge side)
...
Oil Pump Inspection
1.
Remove the relief plunger.
Remove the plug (A), spring (B) and relief plunger (C).
Tightening torque
Plug (A) :
...
See also:
Steering Column and Shaft Inspection
1.
Check the steering column for damage and deformation.
2.
Check the joint bearing for damage and wear.
3.
Che ...
Instrument Cluster Installation
1.
Connect the cluster connector.
2.
Install the cluster assembly.
3.
Install the cluster facia panel.
...
Installation
1.
Install the key lock cylinder.
2.
Install the key warning switch and key Illumination.
3.
Install the key wa ...
Copyright © www.kifomanual.com 2014-2024