Kia Forte: Oil Pump Unit (OPU) Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Oil Pump Unit (OPU) Removal
| 1. |
Remove the negative (-) battery terminal.
|
| 2. |
Remove the crash pad lower panel.
(Refer to Body - “Crash Pad”)
|
| 3. |
Remove the oil pump unit connector (A) and the DC/DC converter
connector (B).
|
| 4. |
Remove the oil pump unit (C) and DC/DC converter (D).
|
Oil Pump Unit (OPU) Installation
1.
Install in the reverse of removal.
...
See also:
Canister Close Valve (CCV) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Lift the vehicle.
3.
Dis ...
Fuel Pump Inspection
[Fuel pump]
1.
Turn ignition switch OFF and disconnect the negative (-)battery
cable.
2.
Remove the fuel pump assembly.
...
Parking Brake Lever Installation
1.
Install the parking brake lever assembly (A).
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...
Copyright © www.kifomanual.com 2014-2024