Kia Forte: Operation
1. |
General Function
A. |
Auto-learn takes place only once per Ignition cycle.
|
B. |
On successful completion, 4 road wheel sensor ID's are
latched into memory for monitoring.
|
C. |
Until Auto-learn completes, previously learned sensors
are monitored for under inflation / leak warnings.
|
|
2. |
General Conditions to Learn New Sensors:
A. |
Receiver must determine that it is confident that sensor
is not temporary:
|
2) |
Uses confidence reduction of previously learned
sensors.
|
|
B. |
Typical time at driving continuously over 15.5 mph(25
kph) to learn a new sensor is up to 20 minutes.
|
|
3. |
General Conditions to Un-Learn a sensor that is removed:
A. |
It takes less than 20 minutes at 15.5 mph(25 mph).
|
B. |
Confidence reduction is dependent on time which vehicle
is driven at speed greater than or equal to 12.4 mph(20 kph).
|
|
1.
Mode
(1)
Virgin State
A.
The receiver as a sole part is shipped in this
state. ...
When the receiver first arrives for replacement:
1)
It will be in Virgin State.
...
See also:
High Mounted Stop Lamp Installation
[2 Door]
1.
Install the high mounted stop lamp assembly.
2.
Install the roof trim assembly.
[4 Door]
1.
...
TJ Joint Replacement
•
Special grease must be applied to the driveshaft joint.
Do not substitute with another ...
Timing Chain Inspection
Sprockets, Chain Tensioner, Chain Guide, Chain Tensioner Arm
1.
Check the CVVT sprocket and crankshaft sprocket for abnormal wear,
cracks, or damage. Replace if necessa ...