Kia Forte: Output Speed Sensor Description

The output speed sensor is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the Transaxle Control Module(TCM). The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.

Input Speed Sensor Installation

1. Installation is the reverse of removal.    After replacement or reinstallation procedure of ...

Output Speed Sensor Specifications

▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.1 ~ 1.55) 0.043 ~ 0.061 Output voltage ...

See also:

Line Pressure Control Solenoid Valve Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

Blower Motor Inspection
1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor voltage does not operate well, substitute ...

Front Door Module  Replacement
1. Remove the front door window glass. (Refer to Front Door - "Front Door Window Glass") 2. Disconnect the front door main con ...