1. |
Turn ignition switch OFF.
|
2. |
Disconnect the Solenoid valve connector.
|
3. |
Measure resistance between sensor signal terminal and sensor ground
terminal.
|
4. |
Check that the resistance is within the specification.
(Refer to Overdrive Clutch Control Solenoid Valve - "Specifications")
|
Installation
•
Do not turn the ignition switch ON and do not contact
the battery cable while replacin ...
Head Lamps Installation
1.
Install the head lamp bulbs.
2.
Connect the connectors.
3.
Install the head lamp bolts (3EA).
...
Fuel Sender Installation
1.
Install in the reverse order of removal.
...