Kia Forte: Power Door Lock Switch Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Switch Removal
Driver Door Lock Switch
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
| 3. |
Disconnect the power window switch module connectors (A) from
the door trim.
|
| 4. |
Remove the power window switch (A) after loosening 4 screws.
|
Passenger Door Lock Switch
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
| 3. |
Disconnect the power window switch module connector from the door
trim.
|
| 4. |
Remove the power window switch (A) after loosening the mounting
screws.
|
Power Door Lock Switch Inspection
Driver Door Lock Switch
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front ...
Power Door Lock Switch Installation
1.
Install the power window switch.
2.
Connect the connector and install the front door trim.
...
See also:
Sub Frame Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A ...
Front Wiper Motor Removal
1.
Loosen the windshield wiper arm nut (B) after removing a wiper
cap (A).
2.
Remove the windshield wiper arm and blade.
...
Fuel Pump Installation
1.
Install in the reverse order of removal.
Be careful of fuel pump direc ...
Copyright © www.kifomanual.com 2014-2024