Kia Forte: Power Mosfet Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Blower / Power Mosfet Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Disconnect the power mosfet connector (A) and then remove the
power mosfet (B) after loosening the mounting screws.
|
| 3. |
Install in the reverse order of removal.
|
Power Mosfet Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of
the blower motor.
3. ...
Blower Resistor Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
If the measured resistance is not within specification, the blower
re ...
See also:
Fuel requirements
Your new Kia vehicle is designed to use only unleaded fuel having a pump octane
number ((R+M)/2) of 87 (Research Octane Number 91) or higher.
Your new vehicle is designed to obtain maximum performan ...
Components
(4Door, 2Door)
1. Rear window glass
2. Rear window glass moulding
...
Condenser Replacement
1.
Recover the refrigerant with a recovery/ recycling/ charging station.
2.
Disconnect the negative (-) battery terminal.
3 ...
Copyright © www.kifomanual.com 2014-2024