Power Seat Motor |
1. |
Remove the seat and all motor connectors.
A : Slide motor
B : Height motor
C : Tilt motor
D : Recline motor
E : Lumbar support motor
|
2. |
With the battery connected directly to the motor terminals, check
if the motors run smoothly.
|
3. |
Reverse the connections and check that the motor rotates in reverse.
|
4. |
If there is an abnormality, replace the motors.
|
AVN Head Unit Components
AVN Head Unit Connector (AVN)
Connector Pin Information
No.
Connector A
Connector B
1
Rear left speaker (+)
MM CAN high
2
...
Defroster
CAUTION - Conductors
To prevent damage to the conductors bonded to the inside surface of the rear
window, never use sharp instruments or window cleaners containing abrasives to clean
the window.
I ...
Variable Charge Motion Actuator (VCMA) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the VCMA connector (A).
...