1. |
It will be able to diagnose defects of power window with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring
and self diagnosis.
|
2. |
Select model and "BCM".
|
3. |
Select the "SJB" to check.
|
4. |
Select "Current data", if you will check current data of power
window system. It provides input/output status of SJB.
|
5. |
If you will check the power door lock operation forcefully, select
"Actuation test".
|
Instrument Cluster Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cluster fascia panel.
(Refer to Body - "Cluster Fascia Panel") ...
SS-B Solenoid Valve(ON/OFF) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Telemetics Unit (TMU) Component
Connector Pin Specification
No.
Pin Name
Type
From
To
Description (Wiring
Spec.)
1
GND
DC Ground
TMU
Batt ...