Kia Forte: Purge Control Solenoid Valve (PCSV) Description

Purge Control Solenoid Valve (PCSV) is installed on the intake manifold and controls the evaporative purge between the canister and the intake manifold. It is a normally closed solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fuel vapor stored in the canister is transferred to the intake manifold.

Injector Installation

   • Install the component with the specified torques. • ...

Purge Control Solenoid Valve (PCSV) Specification

Item Specification Coil Resistance (Ω) 22.0 ~ 26.0 [20°C(68°F)] ...

See also:

Fuel Tank Pressure Sensor (FTPS) Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: ...

Oil Cooler Inspection
Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. ...

Control Shaft Complete Description
Component location : Control shaft assembly is mounted on the top of the manual transaxle Function : Change the gear by shifting a shift lever. ...