1. |
Loosen the wheel nuts slightly. Raise the vehicle, and make sure
it is securely supported.
|
2. |
Remove the front wheel and tire (A) from front hub.
|
3. |
Remove the rear shock absorber (A) from the frame by loosening
the bolt & nut.
|
4. |
Installation is the reverse of removal.
|
5. |
Check the rear alignment.
(Refer to Rear Suspension System - "Rear Alignment")
|
1. TCM Connector and Terminal Function
...
Components
Input/Output Specification
IMS input/output pin information
No.
Signal Name
I/O
Contents
Remark
A1
-
-
-
...
Alternator Reassembly
1.
Reassemble in the reverse order of disassembly.
•
...