(4Door, 5Door) |
1. |
Remove the rear door window glass.
(Refer to Rear Door - "Rear Door Window Glass")
|
2. |
Disconnect the rear door main connector (A).
|
3. |
Disconnect the rear door latch connector (A).
|
4. |
After loosening the mounting bolts, then remove the rear door
module (A).
|
5. |
Remove the rear door main connector pad (A) and mounting clip
(B).
|
6. |
Disconnect the connectors and rear door module wiring harness
(A).
|
7. |
Reomove the rear speaker .
(Refer to Body Electrical System - "Speakers")
|
8. |
Remove the rear power window motor.
(Refer to Body Electrical System - "Power Window Motor")
|
9. |
Install in the reverse order of removal.
|
Front Seat Belt Pretensioner Component Location
(4Door, 5Door)
1. Front seat belt pretensioner
...
Components
1. Front seat headrest
2. Front seat headrest guide
3. Front seat back cover
4. Front seat back warmer
5. Front seat back pad
6. Front seat back silener cloth
7. Front se ...
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by the signal from the control unit. Pressing the intake selection switch
will shift between recirculation and ...