(4Door, 5Door) |
1. |
Remove the hole plug (B).
|
2. |
After loosening the mounting bolt, then remove the rear door outside
handle cover (A).
|
3. |
Remove the rear door outside handle (A) by sliding it rearward.
|
4. |
Install in the reverse order of removal.
|
Installation
1.
Install in the reverse order of removal.
Use a new washer (A) whenever ...
Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly.
Open the hood after turning off the engine on a flat surface, shifting the shift
lever to the P(Park) position f ...
Blower Resistor Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
If the measured resistance is not within specification, the blower
re ...