1. |
Remove the center fascia panel.
(Refer to Body - "Center Fascia Panel")
|
2. |
Remove the cluster fascia panel.
(Refer to Body - "Cluster Fascia Panel")
|
3. |
After loosening the mounting screws, remove the drive airvent
duct assembly (A).
|
4. |
After loosening the mounting screws, disconnect the connector
(A), and then remove the center fascia cover (B).
|
5. |
Disconnect the clock switch connector (A).
|
6. |
After loosening the mounting screws, remove the center airvent
duct assembly [RH] (A).
|
7. |
Remove the in-car hose (A).
|
8. |
Disconnect the in-car sensor connector (B).
|
9. |
After loosening the mounting screws, remove the A/C & heater controller
(A).
|
10. |
Disconnect the A/C & heater controller connector (A).
|
11. |
Install in the reverse order of removal.
|
Installation
1.
Install in the reverse order of removal.
2.
Adjust the ignition lock switch.
(1)
In state of full stro ...
Components
Components (1)
(Rear Seat 5:5 Type)
[Rear Seat Back]
1. Rear seat headrest
2. Rear seat back webbing guide
3. Rear seat headrest guide
4. Rear seat back ...
TPMS Sensor
1.
Storage State
Sensors are in this state when they first arrive at dealership.
This state is entered by LF request/command only.
Either LF request ...