(4Door) |
|
|
1. |
Remove the rear wheel house trim.
(Refer to Interior Trim - "Rear Wheel House Trim")
|
2. |
After loosening the mounting bolt, then remove the rear seat belt
lower anchor (A).
[LH,RH]
[Center]
|
3. |
Disconnect the high Mounted stop lamp (A) connecter from inside
the trunk.
|
4. |
Remove the rear seat belt upper anchor cover (A).
|
5. |
Using a screwdriver or remover, remove the rear package tray trim
(A).
|
6. |
Install in the reverse order of removal.
|
|
|
1. |
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
|
2. |
After loosening the mounting bolt, then remove the rear seat belt
lower anchor (A).
[LH,RH]
[Center]
|
3. |
After loosening the mounting clips and screws, then remove the
rear partition trim (A).
|
4. |
Remove the rear seat belt upper anchor cover (A).
|
5. |
Using a screwdriver or remover, remove the rear package tray trim
(A).
|
6. |
Install in the reverse order of removal.
|
Fluid Replacement
ATF of the 6-speed automatic transaxle does not need to be replaced
for Normal Usage. If the vehicle is used for any of ...
Installation
1.
Install the mirror assembly.
2.
Install the mirror wiring cover and connector.
...
Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
9.81 ~ 500.14 (0.1 ~ 5.1,1.42 ~ 72.54)
Current value(mA)
...