Kia Optima Manuals

Kia Forte: Rear Seat Assembly Replacement - Rear Seat - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Rear Seat Assembly Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Assembly Replacement

[Rear seat cushion assembly]
1.
Disconnect the rear seat cushion heater connector (A) from the trunk inner side.
2.
After loosening the mounting bolts and then push it up and remove the rear seat cushion assembly (B).
Tightening torque :
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~18.8 lb-ft)

3.
Install in the reverse order of removal.
  
•
Make sure the connector is connected properly.
[Rear seat back assembly]
(4Door, 2Door)
1.
Remove the rear seat cushion assembly.
2.
Fold the rear seat back assembly.
3.
After loosening the mounting bolts, then remove the rear seat back assembly (A).
Tightening torque :
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~18.8 lb-ft)

4.
Install in the reverse order of removal.
(5Door)
1.
Remove the rear seat cushion assembly.
2.
Using a flat-tip screwdriver, push the locking pin (B) and then remove the mini buckle (A).
3.
Fold the rear seat back assembly.
4.
After loosening the mounting bolts, then remove the rear seat back assembly (A).
Tightening torque :
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~18.8 lb-ft)

5.
Install in the reverse order of removal.
Rear Seat Assembly Component Location
(4Door, 2Door) 1. Rear seat cushion assembly 2. Rear seat back assembly (5Door) 1. Rear seat back assembly [LH] 2. Rear seat back ...

Rear Seat Back Cover Component Location
(4Door, 2Door) 1. Rear seat back cover [LH] 2. Rear seat back cover [RH] (5Door) 1. Rear seat back assembly [LH] 2. Rear seat ...

See also:

Cargo area cover (5 Door)
Use the cover to hide items stored in the cargo area. The cargo area cover will be lifted when the tailgate is opened. Disconnect the strap (1) from holder if you want to return the cover to ori ...

Components
1. Camshaft bearing cap 2. Camshaft front bearing cap 3. Exhaust camshaft 4. Intake camshaft 5. Exhaust CVVT assembly 6. Intake CVVT assembly 7. Cam carrier 8. Cyli ...

EBD(Electronic Brake-force Distribution)
The EBD system (Electronic Brake force Distribution) as a sub-system of the ABS system is to control the effective adhesion utilization by the rear wheels. It further utilizes the efficie ...

Categories


Copyright © www.kifomanual.com 2014-2024