1. |
Check the rubber parts for wear and deterioration.
|
2. |
Compress and extend the piston rod (A) and check that there is
no abnormal resistance or unusual sound during operation.
|
1. |
Fully extend the piston rod.
|
2. |
Drill a hole on the (A) section to remove gas from the cylinder.
|
DC/DC Converter Installation
1.
Install in the reverse order of removal.
If the battery negative (-) c ...
Rear Drum Brake
Components
1. Shoe hold down pin
2. Shoe adjuster
3. Upper return spring
4. Adjusting lever
5. Shoe
6. Adjusting spring
7. Lower return spring
8. Shoe hold spri ...
Replacement
•
Put on gloves to protect your hands.
&n ...