1. |
Loosen the wheel nuts slightly. Raise the vehicle, and make sure
it is securely supported.
|
2. |
Remove the front wheel and tire (A) from front hub.
|
3. |
Remove the rear shock absorber (A) from the frame by loosening
the bolt.
|
4. |
Loosen the bolt & nut and then remove the rear shock absorber
(A) from the torsion beam axle.
|
5. |
Installation is the reverse of removal.
|
6. |
Check the rear alignment.
(Refer to Rear Suspension System - "Rear Alignment")
|
Inspection
1.
Check the brake tubes for cracks, crimps and corrosion.
2.
Check the brake hoses for cracks, damage and fluid leakage.
3 ...
Adjustment
(4Door, 2Door)
1.
After loosening the trunk lid hinge (A) mounting bolt, adjust
the trunk lid by moving it up or down, or right or left.
2 ...