(5Door) |
|
|
1. |
Remove the tail gate upper trim.
(Refer to Tail Gate - "Tail Gate Trim")
|
2. |
Disconnect the washer nozzle hose (A) and high mounted stop lamp
connector (B).
|
3. |
Remove the caps (A).
|
4. |
Loosen the rear spoiler mounting nuts (B).
|
5. |
Remove the rear spoiler (A).
|
6. |
Install in the reverse order of removal.
|
Canister Inspection
1.
Check for the following items visually.
- Cracks or leakage of the canister
- Loose connection, distortion, or damage of the vapor hose/tube
A ...
On-vehicle Inpection
•
First of all, check for DTCs. If a DTC is present, perform
troubleshooting in accordan ...
Heated Oxygen Sensor (HO2S) Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S termi ...