(4Door) |
|
|
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
2. |
Remove the rear seat back assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
3. |
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
|
4. |
Remove the rear door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
|
5. |
Slighty remove the rear door body side weatherstrip.
|
6. |
After loosening the mounting clips and screws, then remove the
rear partition trim (A).
|
7. |
Using a screwdriver or remover, remove the rear wheel house trim
(A).
|
8. |
Install in the reverse order of removal.
|
|
|
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
2. |
Remove the rear seat back assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
3. |
Remove the rear shelf side trim.
(Refer to Interior Trim - "Rear Shelf Side Trim")
|
4. |
Remove the rear door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
|
5. |
Slighty remove the rear door body side weatherstrip.
|
6. |
After loosening the mounting screw, then remove the rear wheel
house trim (A).
|
7. |
Install in the reverse order of removal.
|
Body Panel Gaps
...
Starter Specification
Starter [Non-ISG type]
Item
Specification
Rated voltage
12 V, 1.2 kW
The number of pinion teeth
13
Performance
[No-load, 11 V] ...
Circuit Diagram
...