1. |
Remove the rear wheel and tire.
|
2. |
Remove the rear wheel speed sensor mounting bolt (A).
|
3. |
Remove the rear wheel speed sensor cable mounting bolt.
|
4. |
Remove the rear wheel house trim.
(Refer to Body - "Rear wheel house trim")
|
5. |
Disconnect the rear wheel speed sensor connector and than remove
the rear wheel speed sensor.
|
6. |
Install in the reverse order of removal.
|
Special Service Tools
Tool(Number and Name)
Illustration
Use
Deployment tool
0957A-34100A
Airbag deployment tool.
Deployment adapter
0957A-3Q100
...
Interior
Interior A
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Interior B
* These dimens ...
Injector Description
Based on information from various sensors, the ECM can calculate the fuel
amount to be injected. The fuel injector is a solenoid-operated valve and the
fuel injection amount is controlled by ...