1. |
Remove the condenser, and then remove the bottom cap (B) with
a L wrench (A) from the condenser.
|
2. |
Remove the receiver-drier (A) from condenser using a long nose
plier. Check for crumbled receiver-drier and clogged bottom cap filter.
|
3. |
Apply air conditioning compressor oil along the O-rings and threads
of the new bottom cap.
|
4. |
Insert a new receiver-drier into the receiver drier tank. The
receiver-drier must be sealed in vacuum before it is exposed to air
for use.
|
5. |
Install the new bottom cap to the condenser.
|
Inhibitor Switch Specifications
▷ Type: Combination of output signals from 4 terminals
Power supply (V)
12
Output type
Combination of output signals
Signal Code Table
...
Cruise Control Switch Installation
1.
Reassemble the cruise control switch after connecting the connector.
2.
Reassemble the driver airbag module.
...
Description
•
Component location : Ignition
lock switch is connected to clutch pedal assembly.
•
Function
1.
Start is po ...