Kia Forte: Relay Box (Passenger Compartment) Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Fuses And Relays / Relay Box (Passenger Compartment) Removal
Passenger Compartment Junction Box (SJB)
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the crash pad lower panel.
(Refer Body - "Crash Pad Lower Panel")
|
| 3. |
Disconnect the connectors from the fuse side of the smart junction
box.
|
| 4. |
Remove the smart junction box after loosening the mounting nuts
(2EA) and bolt.
|
| 5. |
Disconnect the connectors from the back side of the smart junction
box.
|
Relay Box (Passenger Compartment) Inspection
1.
The SJB can be diagnosed by using the GDS. The SJB communicates
with the GDS which then displays inputs and outputs along with codes.
2.
...
Relay Box (Passenger Compartment) Installation
1.
Install the smart junction box.
2.
Install the crash pad lower panel.
3.
Check that all system operates norm ...
See also:
Steering Column Shroud Panel Replacement
[Steering column shroud lower panel]
•
Put on gloves to protect your hands.
...
Positive Crankcase Ventilation (PCV) Valve Installation
1.
Installation is reverse of removal.
PCV Valve installation:
1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft)
...
Installation
1.
Remove ignition key from the vehicle.
2.
Disconnect the negative (-) cable from battery and wait for at
least thirty seconds.
...
Copyright © www.kifomanual.com 2014-2024