Kia Forte: Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
|
| 3. |
Remove the bolt and disconnect the horn connectors, then remove
the horn (A).
|
Inspection
Test the horn by connecting battery voltage to the 1 terminal and ground
the 2 terminal.
The horn should make a sound. If the horn fails to make a sound, replace
it.
Horn Relay Inspec ...
Installation
1.
Install the horn and connect the horn connector.
2.
Reassemble the front bumper cover.
...
See also:
Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for
the first 600 miles (1,000 km) you may add to the performance, economy and life
of your vehicle.
Do not race the e ...
Rear Coil Spring Components
1. Spring upper pad
2. Spring
3. Spring lower pad
...
Knock Sensor (KS) Installation
•
Install the component with the specified torques.
•
...
Copyright © www.kifomanual.com 2014-2024