1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the smart junction box
(Refer to Body Electrical System - "Relay Box (Passenger Compartment)")
|
3. |
Disconnect clutch switch connector (A).
|
4. |
Remove the clutch switch (B) by loosening a nut (A).
|
Cooling Fan Inspection
Fan Motor
1.
Disconnect the fan motor connector from the resistor.
2.
Connect the battery voltage to the "+" terminal and ...
35R Clutch Control Solenoid Valve(35R/C_VFS) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Removal
1.
Remove the mirror wiring cover (A).
2.
Disconnect the mirror connector (B).
3.
Loosen the mirror mou ...