1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the smart junction box.
(Refer to Body Electrical System - "Relay Box (Passenger Compartment)")
|
3. |
Disconnect the ignition lock switch connector (A).
|
4. |
Remove the ignition lock switch by loosening a nut (A).
|
Blower Unit Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater - "Heater Unit")
...
Hood Latch Component Location
1. Hood latch assembly
...
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cov ...