Kia Forte: Removal
| 1. |
Separate the push rod (C) after remove the pin (A) and washer
(B).
|
| 2. |
Remove the battery.
(Refer to Engine Electrical System - "Battery")
|
| 3. |
Remove the ECM.
(Refer to Engine Control/Fuel System - "Engine Control Module
(ECM)")
|
| 4. |
Disconnect the clutch regulator (B) and reservoir hose (A) from
the clutch master cylinder.
|
| 5. |
Remove the master cylinder (A) by rotating in a clockwise direction.
|
Components
1. Reverse hose
2. Master cylinder
3. Ignition lock switch
4. Clutch switch
5. Clutch arm assembly
6. Pedal pad
...
Installation
1.
Install in the reverse order of removal.
2.
After be equipped, perform bleeding air procedure in clutch release
cylinder after pouring ...
See also:
Heater Core Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater -"Heater Unit")
...
Glove Box Housing Component Location
1. Glove box housing
...
DC/DC Converter Description
Due to the considerably more frequent occurrence of starting operations,
the electrical load that occurs often leads to voltage dips in the vehicle network.
In order to stabilize the power s ...
Copyright © www.kifomanual.com 2014-2024