1. |
Remove the transaxle assembly.
(Refer to Manual Transaxle System - " Manual Transaxle")
|
2. |
Remove the clutch release bearing (A).
|
3. |
Pull the clip (A).
|
4. |
Remove the clutch release fork (A).
|
5. |
Remove the boot (A).
|
Cylinder Head Disassembly
Identify, valves and valve springs as they are removed so that
each item can be reinstalled in its original position.
...
Rear Glass Defogger Printed Heater Inspection
Wrap tin foil around the end of the voltmeter test lead to prevent
damaging the heater line. Apply finger pressure on th ...
Canister Close Valve (CCV) Description
Canister Close Valve (CCV) is normally open and is installed on the canister
ventilation line. It seals evaporative emission control system by shutting the
canister from the atmosphere during ...