1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
3. |
Remove the floor console.
(Refer to Body - "Floor console")
|
4. |
Remove the rear air vent duct (A).
|
5. |
Pull up the lock, of the SRSCM connector, the disconnect the connector
(A).
|
6. |
Remove the SRSCM mounting bolt and nuts from the SRSCM, then remove
the SRSCM.
|
Front Door Outside Handle Replacement
(4Door, 5Door, 2Door)
1.
Remove the front door module.
(Refer to Front Door - "Front Door Module")
2.
Disconnect ...
Air Ventilation Seat Unit Description
The ventilated seat system uses a Push method to cool the seat. A blower
mounted in the seat generates the cool air, which then travels through ducts
to the seat back and cushion.
...
Inspection (With GDS)
1.
Check BCM input/output specification of multifunction switch using
the GDS. If the specification is abnormal, replace the lamp or wiper
switch.
...