|
1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
2. |
Left side - Remove the head lamp assembly.
(Refer to Body electrical - "Head Lamps")
Right side - Remove the washer reservoir.
(Refer to Body electrical - "Front washer motor")
|
3. |
Disconnect the front impact sensor connector (A).
|
4. |
Remove the front impact sensor after loosening the mounting nut
(B).
|
Specifications
Front Suspension
Item
Specification
Suspension type
MacPherson Strut
Shock absorber
Type
Gas
Coil spring
Nu Engine ...
Canister Close Valve (CCV) Specification
Item
Specification
Coil Resistance (Ω)
19.5 ~ 22.5 [20°C(68°F)
...
Coolant Refilling And Bleeding
Never remove the radiator cap when the engine is hot. Serious
scalding could be caused by hot fluid under high pressure ...