Kia Forte: Removal
| 1. |
Disconnect the battery negative cable and wait for at least thirty
seconds.
before beginning work.
|
| 2. |
Remove the roof trim assembly.
(Refer to Body - "Roof trim assembly")
|
| 3. |
Disconnect the curtain airbag harness connector (A).
|
| 4. |
After loosening the mounting bolts remove the curtain airbag.
|
Components
...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
See also:
Troubleshooting
1.
The lamp switch inputs can be checked using the GDS.
2.
To check the input value of lamp switch, select option "Body Control
Module ...
Output Speed Sensor Description
The output speed sensor is a vital unit that measures the rate of rotation
of the transaxle's turbine shaft and output shaft, and delivers the readings
to the Transaxle Control Module(TCM ...
If you have a flat tire (If equipped)
Jack and tools
The spare tire, jack, jack handle and wheel lug nut wrench are stored in the
luggage compartment.
Remove the luggage under tray out of the way to reach the equipment.
(1) Jack h ...
Copyright © www.kifomanual.com 2014-2024