1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
2. |
Remove the seat belt after pushing the lock pin (A).
|
3. |
Remove the door scuff trim.
(Refer to Body - "Door scuff trim")
|
4. |
Remove the center pillar trim.
(Refer to Body - "Center pillar trim")
|
5. |
Disconnect the emergency fastening device connector (A).
|
6. |
Loosen the emergency fastening device mounting bolt (B) and remove
the emergency fastening device.
|
Troubleshooting Guide
Before Thinking The Product Has Malfunctioned
1.
Errors which occur during the operation or installation of the
device may be mistaken as a malfunction of the actual de ...
Rear Seat Back Cover Replacement
(4Door, 2Door)
[LH]
•
Put on gloves to protect your hands.
...
Positive Crankcase Ventilation (PCV) Valve Operation Principle
...