Rear Brake Pads |
1. |
Remove the rear wheel & tire.
|
2. |
Release the parking brake lever and parking brake cable is loose.
|
3. |
Loosen the guide rod bolt (B) and then remove the rear caliper
body (C).
|
4. |
Replace pad retainers (C) and brake pads (B) in the caliper carrier
(A).
|
5. |
Rotate the caliper piston and push the direction of the arrow.
|
6. |
Place the caliper body (C) on the caliper carrier and tighten
the guide rod bolts (B).
|
7. |
Install the rear wheel & tire.
|
Alternator Description
The Alternator has eight built-in diodes, each rectifying AC current to
DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage ...
Fuel Filter Installation
1.
Install in the reverse order of removal.
...
ETC (Electronic Throttle Control) System Schematic Diagram
...