|
|
1. |
Remove the head lamps.
(Refer to Body Electrical System - "Head Lamps")
|
2. |
Remove the quarter fixed glass.
(Refer to "Quarter Fixed Glass")
|
3. |
Loosen the front wheel guard mounting clips and screws.
|
4. |
After loosening the mounting screws, then remove the front bumper
side mounting bracket (A).
|
5. |
After loosening the mounting bolts and nut, then remove the fender
assembly (A).
|
6. |
Install in the reverse order of removal.
|
Components Location
1. Converter housing
2. Automatic transaxle upper mounting bolt
3. Shift cable bracket
4. Manual control lever
5. Rear cover
6. Oil cooler tube
7. Oil level plug
8. Val ...
Operation
Evaporative System Monitoring
Evaporative And ORVR Emission Control System
This system consists of a fill vent valve, fuel shut-off valve, fuel cut
valve (for roll over), two way val ...
Lubricants
Item
Specified lubricant
Quantity
Transaxle fluid
ATF SP-Ⅳ or equivalent
7.3L
(1.93 U.S gal., 7.71 U.S.qt., 6.42 Imp.qt ...