1. |
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
|
2. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
3. |
Remove the airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
|
4. |
Disconnect the connector & lock nut (A) and then remove the steering
wheel (B) by using special service tools (09561-11001).
|
5. |
Installation is the reverse of the removal.
|
Windshield Wiper-Washer Switch Inspection
Check for continuity between the terminals while operating the wiper and
washer switch. If it is not normal condition, replace wiper and wiper switch.
Wiper Switch
Washer Switch
...
Starter Description
The starting system includes the battery, starter, solenoid switch, inhibitor
switch (A/T), ignition switch, ignition lock switch, connection wires and the
battery cable.
When the ignitio ...
Tire Removal
1.
Remove valve core and deflate the tire.
2.
Remove the side of the tire bead area from the wheel using tire
changing machine .
...