1. |
Remove the rear roof trim.
(Refer to Body - "Roof Trim Assembly")
|
2. |
Disconnect roof antenna connectors (A).
|
3. |
Remove the roof antenna after removing a nut (A).
|
Engine Control Module (ECM) Removal
When replacing the ECM, the vehicle equipped with the immobilizer
must be performed procedure as below.
...
Adjustment
Concentric Slave Cylinder Air Bleeding
Procedure
1.
After disconnecting a cap from the concentric slave cylinder air
bleeder, insert a vinyl hose in the pl ...
Specifications
Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
22.0 ~ 26.0 [20°C(68°F)]
Fuel Ta ...