1. |
Disconnect the negative(-) battery terminal.
|
2. |
Carefully remove the lamp lens (A) from the room lamp with a flat-tip
screwdriver.
|
3. |
Replace the bulbs (A) and remove the screws if it is necessary.
|
4. |
Remove the room lamp assembly (A) after disconnecting the connector.
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the vanity lamp (A) using a screwdriver or remover and
then disconnect the connector (B).
|
Variable Charge Motion Actuator (VCMA) Installation
•
Install the component with the specified torques.
•
...
Output Speed Sensor Description
The output speed sensor is a vital unit that measures the rate of rotation
of the transaxle's turbine shaft and output shaft, and delivers the readings
to the Transaxle Control Module(TCM ...
Specifications
Fuel Delivery System
Items
Specification
Fuel Tank
Capacity
50 lit. (13.2 U.S.gal., 52.8 U.S.qt., 44.0 Imp.qt.)
Fuel Filter
Ty ...