Never attempt to measure the circuit resistance of the Seat Belt
Pretensioner (BPT) even if you are using the specified tester. If the
circuit resistance is measured with a tester, the pretensioner will
be ignited accidentally. This will result in serious personal injury.
|
Heated Oxygen Sensor (HO2S) Installation
•
Install the component with the specified torques.
•
...
Adjustment
Clutch Release Cylinder Air Bleeding
Procedure
•
Use the specified fluid. Avoi ...
Parking Brake Lever Installation
1.
Install the parking brake lever assembly (A).
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...