Kia Forte: Seat Belt Switch Description

Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG function reacts as follows. If the seat belt or door is opened, the engine must not be started or stopped by the ISG function for safety reasons.

Door Switch Installation

1. Install in reverse of removal. ...

Seat Belt Switch Inspection

1. Remove the connector from the switch. 2. Check for continuity between terminals. Seat belt condition Continu ...

See also:

Center Pillar Trim Replacement
[Center pillar lower trim] (4Door, 5Door)    • Put on gloves to protect your hand ...

Checking the engine oil level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...

Engine Coolant Temperature Sensor (ECTS) Circuit Diagram
(M/T) (A/T) ...