Kia Forte: Shift Cable Installation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Shift Cable Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable Installation

1.
Install in the reverse order of removal.
  
Install the cable after placing the shift lever and the transmission manual control lever in the N position.
Adjust the control cable.
Shift Cable Removal
1. Remove the floor console assembly. (Refer to Body - "Floor Consol") 2. Remove the air duct. 3. ...

Shift Cable Adjustment
1. Place the shift lever in the interior, and the transmission manual control lever, to the N position. 2. Connect the shift lever (B) in ...

See also:

Alternator On-vehicle Inpection
   • Check that the battery cables are connected to the correct terminals. ...

Components
Components (1) (4Door, 2Door) 1. Rear bumper cover 2. Rear bumper beam assembly 3. Rear bumper lower side bracket 4. Rear bumper side bracket [RH] 5. Rear bump ...

Relay Box (Engine Compartment) Inspection
Power Relay Test (Type A)    - Do not use pliers. - ...

Copyright © www.kifomanual.com 2014-2024