1. |
Remove the floor console assembly.
(Refer to Body - "Floor Consol")
|
2. |
Remove the air duct.
|
3. |
Remove the shift cable (A).
|
4. |
Remove the retainer (A) and nut (B).
|
5. |
Remove the nut (C) from the manual control lever.
|
6. |
Remove the cable (B) from the bracket (A) at transaxle assembly
side.
|
7. |
Remove the shift cable by pulling it toward the interior.
|
Specifications
Item
Specification
Master cylinder
Type
Fixed seal
Cylinder I.D.
22.22 mm
Piston stroke
45 ± 1 mm (1.77 ± 0.039 in)
...
Output Speed Sensor Removal
1.
Disconnect the negative (-) battery cable.
2.
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - &qu ...
Rear Drum Brake
Components
1. Shoe hold down pin
2. Shoe adjuster
3. Upper return spring
4. Adjusting lever
5. Shoe
6. Adjusting spring
7. Lower return spring
8. Shoe hold spri ...