1. |
Check operating of lever of T/M side when operating shift lever
after assembly.
|
2. |
When shift lever to "R" position, check the position of "skirt".
|
3. |
When lever is shifted to each position, if stop occur between
two position, re-adjust select cable.
(Refer to Control cable - "Adjustment")
|
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
Direct control VFS[OD/C]
▷ Control type : Normal high type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42)
Current value(mA)
...
MENU : My Music Mode
In My Music mode, press the
key to set the Repeat, Random, Information, Delete, Delete All, and Delete Selection
features.
Repeat
Press the
key
Set [
RPT] through the
TUNE kn ...
Components Location
1. Engine Control Module (ECM)
2. Manifold Absolute Pressure Sensor (MAPS)
3. Intake Air Temperature Sensor (IATS)
4. Engine Coolant Temperature Sensor (ECTS)
5. Throttle Positi ...