Kia Forte: Shift Lever Removal - Automatic Transaxle Control System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Shift Lever Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Lever Removal

1.
Remove the floor console assembly.
(Refer to Body - "Floor Console")
2.
Remove the air duct.
3.
Disconnect the control cable (A).

4.
Disconnect the connector (A).
5.
Disconnect the wire mounting clips (B).
6.
Remove the bolts and then shift lever assembly (A).

Tightening torque:
8.8 ~ 13.7N.m(0.9 ~ 1.4kgf.m, 6.5 ~ 10.1lb-ft)

Shift Lever Components
1. Shift lever knob 2. Shift lever assembly 3. Shift cable assembly 4. Shift lever knob & boots assembly 5. Manual control lever 6. Retainer ...

Shift Lever Installation
1. Install in the reverse order of removal.    Install the cable after placi ...

See also:

Opening the fuel filler lid
The fuel filler lid must be opened from inside the vehicle by pulling up the fuel filler lid opener. If the fuel filler lid does not open because ice has formed around it, tap lightly or push o ...

Engine Room Under Cover Removal and Installation
1. Remove the under cover front panel (A). 2. Remove the under covers (B). Tightening torque: 3.9 ~ 5.9 N ...

IMS Control Switch Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the seat side cover (A). 3. Disconnect the p ...

Copyright © www.kifomanual.com 2014-2024