1. |
Install the smart key unit and RF receiver.
|
2. |
Connect the connector and install the smart key unit.
|
3. |
Install the main crash pad assembly.
|
4. |
Install the negative (-) battery terminal and check the smart
key system.
|
1. |
Install the interior antenna.
|
2. |
Install the floor console assembly.
|
3. |
Install the negative (-) battery terminal and check the smart
key system.
|
1. |
Install the trunk antenna.
|
2. |
Install the rear transverse trim.
|
3. |
Install the negative (-) battery terminal and check the smart
key system.
|
1. |
Install the exterior bumper antenna.
|
2. |
Install the rear bumper cover.
|
3. |
Install the negative (-) battery terminal and check the smart
key system.
|
1. |
Install the buzzer.
|
2. |
Install the front left wheel guard.
|
3. |
Install the negative (-) battery terminal and check the smart
key system.
|
1. |
Install the door outside handle.
|
2. |
Install the door trim.
|
3. |
Install the negative (-) battery terminal and check the smart
key system.
|
1. |
Install the trunk lid open switch.
|
2. |
Install the trunk trim.
|
3. |
Install the negative (-) battery terminal and check the smart
key system.
|
Condenser Replacement
1.
Recover the refrigerant with a recovery/ recycling/ charging station.
2.
Disconnect the negative (-) battery terminal.
3 ...
Installation
1.
Install in the reverse order of removal.
Use a new washer (A) whenever ...
Replacement
Front brake pads
1.
Loosen the guide rod bolt (B) and pivot the caliper (A) up out
of the way.
Tightening torque:
21.6 ~ 31.4 N.m ...