Kia Forte: Special Service Tools
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Manual Transaxle System / Special Service Tools
| Tool (Number and Name) |
Illustration |
Use |
| 09200-3N000 Engine support fixture (Beam) |
|
Removal and installation of the transaxle.Use this adapter (SST
No. : 09200-4X000) with the supporter (SST No. : 09200-2S000).※Permit operating
with 09200-38001. |
| 09200-2S000 Engine support fixture (Supporter) |
|
Removal and installation of the transaxle.Use this beam (SST
No. : 09200-3N000) with the adapter (SST No. : 09200-4X000). |
| 09200-4X000 Engine support fixture (Adapter) |
|
Removal and installation of the transaxle. Use this beam (SST No. : 09200-38001/3N000) with the supporter (SST No. : 09200-2S000). |
| 09453-2F300 Oil seal installer |
|
Installation of transaxle case oil seal. |
※ Engine support fixture special tool assembly drawing
| 1. 09200-3N000 (Main bar) 2. 09200-3N000 (Sub bar) 3. 09200-3N000 (Handle) 4. 09200-3N000 (Stopper) 5. 09200-3N000 (Bolt-1) 6. 09200-4X000 (Adapter) 7. 09200-2S000 (Supporter) 8. 09200-2S000 (Supporter) 9. 09200-3N000 (Nut) |
10. 09200-3N000 (Snap ring) 11. 09200-3N000 (Sub fixture) 12. 09200-3N000 (Stopper) 13. 09200-3N000 (Nut) 14. 09200-2S000 (Spacer) 15. 09200-2S000 (Sub fixture) 16. 09200-2S000 (Nut) 17. 09200-3N000 (Pin) |
Sealant
Items
Specified sealant
Control shaft assembly
MS721-40 or MS721-38
...
See also:
SS-B Solenoid Valve(ON/OFF) Removal
1.
Disconnect the negative (-) battery cable.
2.
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - &qu ...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least thirty seconds bef ...
Checking the parking brake
Check the stroke of the parking brake by counting the number of “clicks’’ heard
while fully applying it from the released position. Also, the parking brake alone
should securely hold the vehicle ...
Copyright © www.kifomanual.com 2014-2024