1. |
Turn ignition switch OFF.
|
2. |
Disconnect the Solenoid valve connector.
|
3. |
Measure resistance between sensor signal terminal and sensor ground
terminal.
|
4. |
Check that the resistance is within the specification.
(Refer to SS-B Solenoid Valve - "Specifications")
|
Head Lamps Component
1. Head lamp assembly lens & housing
2. Head lamp (High) lamp
3. Dust cap (High)
4. Head lamp (Low) lamp
5. Dust cap (Low)
6. Turn signal lamp socket
7. Turn signa ...
Delivery Pipe Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Release the residual pressure in fuel line (Refer to the ...
Climate Control Air Filter Replacement
1.
Disconnect the stopper (B) from the glove box (A).
2.
Disconnect the air damper (A) from the glove box (B).
...