Kia Forte: SS-B Solenoid Valve(ON/OFF) Installation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: SS-B Solenoid Valve(ON/OFF) Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / SS-B Solenoid Valve(ON/OFF) Installation

1.
Install in the reverse order of removal.
  
When installing, apply the ATF oil or white vaseline to the O-ring (A) not to be damaged.

The gasket of the valve body gasket (A) use new one.

Adding automatic transaxle fluid.
(Refer to Hydraulic System - "Fluid")
SS-B Solenoid Valve(ON/OFF) Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

Inhibitor Switch Description
Inhibitor Switch monitors the lever's position(P, R, N, D) and is used to control gear setting signals. ...

See also:

Starter Disassembly (NON-ISG Type)
1. Disconnect the M-terminal (A) on the magnet switch assembly. 2. After loosening the screws (A), detach the magnet switch ssembly ...

Heated Oxygen Sensor (HO2S) Circuit Diagram
(M/T) (A/T) ...

Brake Booster Vacuum Pressure Sensor Installation
   Brake Booster Vacuum Pressure Sensor can not be replaced separately due to vacuum leak. Therefore, the sensor mu ...

Copyright © www.kifomanual.com 2014-2024